Transmission Service & Repair

Mechanic performing automatic transmission repair at Brisbane workshop

Description

Transmission, Driveshaft, and Differential Maintenance

Every time you press the accelerator, your vehicle’s transmission and drivetrain transfer power from the engine to the wheels.
It’s a complex system made up of the gearbox, driveshafts, CV joints, differentials, and numerous bearings, seals, and mounts — all working together to deliver smooth motion, responsive handling, and safety on the road.

Over time, these components experience heavy stress from heat, friction, and road conditions. Even a small leak, worn bushing, or unbalanced shaft can affect acceleration, steering precision, and fuel efficiency.
That’s why routine transmission and drivetrain servicing is one of the smartest investments a car owner can make.

At One Stop Auto, we provide complete Transmission & Drivetrain Service and Repair at our Brisbane workshop — ensuring your car performs reliably, smoothly, and safely in every condition.


What’s Included in a Transmission and Drivetrain Service

Our service isn’t limited to checking the gearbox or changing transmission fluid.
We take a full-system approach — inspecting, cleaning, lubricating, and replacing components that keep your power delivery smooth and your ride stable.

Our typical service may include:

  • Transmission fluid and filter replacement — keeping gears cool and lubricated
  • Differential and transfer case servicing — replacing old oil to prevent wear
  • CV joints and driveshaft inspections — ensuring smooth power transfer to wheels
  • Suspension and control arm checks — maintaining steering precision and comfort
  • Mount and bearing replacement — eliminating vibration and noise
  • Steering alignment and balance adjustment — restoring road stability

Every job is performed using manufacturer-approved fluids, precision tools, and high-quality parts that meet or exceed OEM standards.


Common Signs Your Transmission or Drivetrain Needs Attention

Most transmission or drivetrain problems start small — a soft vibration, a slight delay when shifting, or a faint humming noise on acceleration.
Ignoring these signs can lead to costly repairs or even complete failure.

If you notice any of the following symptoms, it’s time to visit our workshop:

  • Vibrations or shaking while driving
  • Clunking or humming sounds when accelerating or decelerating
  • Oil spots or fluid leaks under the vehicle
  • Vehicle pulling to one side when driving
  • Jerky or delayed gear shifting
  • A burning smell after longer drives

Our experienced technicians use advanced diagnostic scanners and mechanical testing tools to identify the root cause of the problem — whether it’s a worn CV joint, leaking seal, misaligned suspension, or transmission control fault.


Why Transmission and Drivetrain Maintenance Matters

Your car’s transmission and drivetrain components operate under high pressure and temperature.
Transmission fluid breaks down over time, losing its ability to lubricate and cool. Rubber bushes and seals harden, bearings wear out, and metal components start to vibrate under stress.

Without proper maintenance, these issues can:

  • Reduce your car’s fuel economy
  • Accelerate tyre and suspension wear
  • Cause unstable or noisy driving
  • Lead to gearbox or differential failure — a major and expensive repair

By servicing your transmission regularly, you not only avoid unexpected breakdowns but also improve comfort, safety, and long-term reliability.

At One Stop Auto, we recommend most vehicles undergo a drivetrain inspection every 12 months or 20,000–25,000 km, and a complete transmission service every two years — depending on driving conditions and vehicle type.


Automatic Transmission vs Drivetrain Service — What’s the Difference

Many drivers think “transmission service” only applies to automatic gearboxes, but it’s much more than that.
The transmission is just one part of the system that delivers motion. The drivetrain includes the differential, axles, joints, and suspension components that actually carry that power to the road.

At our Brisbane workshop, we provide:

  • Automatic transmission servicing — fluid change, filter replacement, leak checks, and computer diagnostics
  • Drivetrain repairs — replacing worn bearings, CV joints, control arms, and suspension mounts
  • Differential and axle maintenance — cleaning, resealing, and refilling with fresh lubricant
  • Steering and alignment corrections — ensuring stability, grip, and safety

So whether you drive a small city car, 4WD, or light commercial vehicle, our team ensures your entire powertrain system performs as one — smooth, balanced, and quiet.


Our Process: From Inspection to Road Test

  1. Visual and diagnostic assessment
    We begin with a thorough inspection of the transmission, driveshafts, and underbody components using diagnostic scanners and visual testing.
  2. Fluid and leak check
    We verify fluid quality and identify any signs of leaks or contamination.
  3. Mechanical inspection
    Bearings, mounts, and joints are checked for play, noise, and wear.
  4. Service or repair
    Depending on condition, components are serviced, replaced, or resealed using high-quality OEM or equivalent parts.
  5. Final testing and quality assurance
    After every repair, the vehicle undergoes a road test to ensure everything runs smoothly and silently.

This structured process allows us to identify not just what’s broken, but why — helping prevent the same issue from returning.


When to Book a Service

Even if your car feels fine, it may still be due for a transmission or drivetrain check.
Fluids degrade gradually, and mechanical components can fail silently before showing symptoms.

Consider scheduling an inspection if:

  • It’s been more than 12 months since your last service
  • You frequently tow or drive long distances
  • You’ve hit a deep pothole or noticed fluid under the car
  • You feel vibration through the steering wheel or floor
  • You’ve recently replaced tyres or brakes and want to ensure alignment stability

Preventive maintenance now costs a fraction of what a gearbox or differential rebuild might later.


Why Choose One Stop Auto

At One Stop Auto, we’re not just mechanics — we’re specialists in powertrain performance.
Our team combines hands-on experience with modern diagnostic tools to deliver accurate results and long-lasting repairs.

Here’s what sets us apart:

  • Advanced diagnostics for automatic transmission and drivetrain systems
  • Qualified Brisbane technicians with years of practical repair experience
  • Transparent quotes and honest communication — no hidden fees
  • High-quality lubricants, seals, and OEM-grade components
  • Fast turnaround and professional workmanship, guaranteed

From the first inspection to the final test drive, we make sure every vehicle leaves our workshop operating safely, smoothly, and efficiently.


Book Your Transmission Service Today

If you’re hearing unusual noises, feeling vibration, or it’s simply time for routine maintenance — we’re here to help.
Visit our Brisbane workshop or contact us today to schedule your Transmission & Drivetrain Service.

Your car deserves professional care, and our team at One Stop Auto ensures you always get exactly that — dependable performance, comfort, and safety on every drive.

Service Provide

Your car’s transmission and drivetrain components work together to keep power flowing smoothly from the engine to the wheels.
At One Stop Auto, our Brisbane workshop provides complete transmission and drivetrain repair — from gearbox servicing and CV joint replacement to steering and suspension work.

We use advanced diagnostic tools and precision equipment to ensure reliable performance, smooth handling, and extended vehicle life. Whether you notice vibrations, fluid leaks, or uneven steering, our qualified technicians will inspect, repair, and restore every component to top condition.

Transmission & differential servicing — fluid replacement, seal checks, and repairs

Driveshafts & CV joints — inspection, lubrication, and replacement

Suspension & control arms — bushes, ball joints, and stabiliser links

Steering components — tie rods, rack ends, and alignment adjustments

Mounts & bearings — vibration and noise diagnostics, replacement where required

If you notice jerking when changing gears, strange noises, leaking fluid, or delayed acceleration — it’s time to get it checked. Small issues can quickly turn into expensive repairs.
Yes. Our workshop services both types — from fluid changes and software diagnostics to clutch replacements and gearbox rebuilds.
We inspect and replace transmission fluid and filters, check seals, CV joints, mounts, and driveline components to ensure smooth operation.
For most vehicles, every 40,000–60,000 km is ideal. Regular maintenance prevents overheating and extends the system’s life.
Absolutely. The drivetrain works as one unit — we check all connecting parts including joints, bearings, and axles during every service.
It’s not recommended. Continuing to drive can damage gears or the torque converter. Bring it in for inspection as soon as possible.
Yes, we only use manufacturer-approved fluids and replacement parts for guaranteed reliability and warranty compliance.
Most transmission services are completed the same day. Major repairs or rebuilds may require up to 2–3 days depending on parts availability.

How Can We Help?

Get Special Offer Today

Your car, our care — anytime, anywhere.
Mobile and workshop services for Brisbane drivers who value quality and honest work.
Talk to One Stop Auto today and get it sorted!

Schedule Your Service Appointment

Drop your name and number — we’ll call or text you to lock in a time.

Call Now